Customization: | Available |
---|---|
After-sales Service: | Iws |
Warranty: | 24 Month |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The hopper is mainly used for loading and unloading coal slag, cement powder, iron ore concentrate, and can be designed in a non-standard way according to customer requirements.
Dust removal device, electric hydraulic door device, and vibrating feeding device can be installed on the hopper, which greatly improves the loading and unloading efficiency.
Keywords: movable hopper, wheel hopper, hopper for grain, ECO hopper, port hopper, hopper load system, dustproof hopper, diesel driven hopper, cement hopper, dedust ECO hopper.
Main features of the eco-hopper | ||
Type of eco-hopper | Tire Mobile Eco-hopper | |
Capacity of eco-hopper | 60m³ | |
Feed material | Cement clinker | |
Density of material | 0.9-1.6 t/m3 | |
Discharge capacity | 500-800TPH | |
Size of upper hopper opening | 6.7m×6.7m | |
Total height of eco-hopper | 11m | |
Hopper wall inclination | ~50° | |
Discharge type | Hydraulic shut-off gate | |
Gantry base distance* span | 9.5m×9.5m | |
Hopper wall material | T8-Q355B | |
Lining board specifications | T6-SUS304 | |
Telescopic loading spout | Electric drive 4kw | |
Air compressor | Screw air compressor, 15KW | |
Hydraulic pump station power | 7.5kw | |
shut-off gate | Cylinder drive control | |
Power supply | Power supply mode | 150KW generator |
Voltage | AC380V 50Hz 3 p+1N | |
Total motor installed | 129Kw | |
Electric control cabinet | IP55,SS304 |
The Hopper is too big, in order to save sea freight cost, the hopper will be transport in pcs normally, and will install on site for finally test.blew is some details picture for the ECO hopper install on site.
1.Pre-sale services:
a: Design customized project for clients.
b: Design and manufacture products according to clients special requirement.
c: Train technical personnel for clients.
2.Services during the sale:
a: Help clients to find reasonable freight forwarders ahead of delivery.
b: Help clients to draw solving plans.
3.After-sale services:
a: Assist clients to prepare for the construction scheme.
b: Install and debug equipment.
c: Train the first-line operators.
d: Examine equipment.
e: Take initiative to eliminate the troubles immediately.
f: Provide technical exchanging.