Singe Hook Crane Container Spreader for 20′ & 40′ Container

• Customization: Available
• After-sales Service: Iws
• Warranty: 24 Month
• Model NO.: JYDJ20-000
• Swl: 35t
• Dead Weight: 2.5 T
• Lifting Point: 4
• Opreation Temperature: -40ºC-50 ºC
• Load: 20 FT ISO Container
• Lock Way: Twistlock
• Control Way: Mechanical
• Transport Package: Nude
• Specification: 20 ft
• Trademark: SHNICETECH
• Origin: China
• HS Code: 8432400000
• Production Capacity: 500

Product Description

Semi-automatic spreaders are fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit.

Automatic container spreader without power
The spreader is equipped on 40t gantry crane to load and unload containers. The spreader is light, no power, easy to operate and cheap. There are two kinds of spreader 32t-20' and 40t-40'.
Operation: first put the four main lifting ropes riggings of the spreaders and one turning stretch wire rope in the hook of the gantry crane. Before lifting, the guider points to open direction. By the localizers at the four sides of the spreader and the skilled operation, the four turning locks of spreader are locked into the corner, and then the hook is started slowly.  The stretch wire rope is firstly tight to pull turning mechanism and turn the turning lock in 90°and be closed, and then keep lifting the hook .The container is lifted.
Lay container down: After hanging containers to be scheduled position, keep the hook fall about 1-2m and then lift the hook again. Before the main lifting wire rope is dragged, lift turning rope to make turning lock back to open position and lift the hook to depart the spreader and container .By now the operation is finished.
Maintenance: The link pole of the spreader and turning mechanism should be opened to check regularly and add lubricating oil to make every part turn fluently. If there are obvious damages and distortion, spreader and wire rope should stop work at once.

Type	SWL	Dead Weight
20feet Container spreader	25-35T	1.2-2.6T
40feet  Container spreader	32-45T	1.2-2.6T

General Drawing

Detailed Photos

details of semi automatic container spreader and operation on site:

 

Packaging & Shipping

Packing for the semi Automatic container spreader:


Rina Class inspection for SHNICETECH container spreader

Our Service

Act as a good adviser and assistant of client, we can help them to get rich and generous returns on their investment.

1.Pre-sale services:  

a: Design customised project for clients.

b: Design and manufcture products according to clients special requirement.

c: Train technical personnel for clients.

2.Services during the sale:

a: Help clients to find reasonable freight forwarders ahead of delivery.

b: Help clients to draw solving plans.

3.After-sale services:

a:Assist clients to prepare for the construction scheme.

b:Install and debug equipment.

c:Train the first-lin operators.

d: Examine equipment.

e: Take initiative to eliminate the troubles immediately.

f:Provide techical exchanging.
 

FAQ

if you are any interest in our container spreader, please feel free to connect with SHNICETECH anytime, we will here for you 24/7.
Blew details can be clear along with your inquiry will be helpful:

What is lifting capacity of spreader? 

What is type of spreader? Semi automatic container spreader, New I type spreader, motor spreader, hydraulic telescopic spreader or electro telescopic spreader? 

If what you need is telescopic spreader, please confirm it is hydraulic telescopic or electric telescopic? 

What is the using temperature of spreader? 

Will you match a rotator with the telescopic spreader? 

Thanks very much for your kindly cooperation!